| ¡@
Home
Products
Plastic
Injection Molding Machine
Preform
Injection System
MicroProcessor
Controller
new model
Plastic
Injection Molding Machine with Microprocessor
2-Color
plastic injection molding machine
CPVC
injection molding machine
plastic injection mold
¡@
¡@
|
PLASTIC
INJECTION MOLDING MACHINES
NS-100T (100 tons) to NS-300T (3000 tons)
Steady Stream Business offers plastic injection molding machines with
up to 3,000 tons capacities featuring high productivity and reliability.
|
Clamping System
Platens manufactured from FCD-500 die casting
*Unchangeable in high pressure of injection
*Increase the precision
5 point up and down toggle clamping structure.
*Clamping force is even
*Install the alloy bushing
*MoS2 lubricant oil to resist wear
*Increase the toggle life
German and ltalian potentiometer control
*Low pressure location is accurate
*Adjustable super low pressure hydraulic system
*Protect the operator and keep the mould safety
Injection System
Double cylinder injection
*Surface is smooth
*Save the energy
Italian hydraulic oil motor
*Reduce dhe starting pressure
High quality pressure & flow proportional control system
*Reduce complete time.
Material barrel & screw adopt Germanic and Japanese steel
*Increase the life and reduce wear
Injection distance
*Germanic and Italian potentiometer control
*High precision and stability
4-step injection, 4-step holding pressure
*Pressure flow control is separated
|
 |
Hydraulic System
1. Oil tank is with "over oil temperature"
alarm system.
2. Oil quantity and pressure control system:
use high quality hydraulic switch.
 |
3. Hydraulic pump: use high
quality, high
efficiency pump.
4. Hydraulic motor:use high quality, high
torsion motor.
5. All O-ring: use Japam"NOK"brand
6. Machine:low noise with power saving circuit
7. Low pressure mold closing protection device
8. Set with"unscrewing system"and "precisioncore
threading function"
9. All the hydraulic system is inside the machine which can
prevent being damaged. |
|
|
|
|
Standard
Accessories
1. Suspended Pole (200 Ton Below)-----------------1pc
2. Suspended Pole Roller (200 Ton Below)----------1pc
3. Tool Box ----------------------------------------1set
Hexagonal Wrench (14mm OR 16mm) ------------2pcs
Hexagonal Wrench (3-10mm) ----------------------1pc
Flat tip Screwdriver --------------------------------1pc
Phillips Screwdriver --------------------------------1pc
Movable Spanner ----------------------------------1pc
Ring Spanner (23mm x 26mm ) ---------------------1pc
Grease Gun ----------------------------------------1pc
4. Mould Clampe -----------------------------------8pcs
5. Mould Clamper Screw ----------------------------8pcs
6. Vibra Te Absorber -------------------------------1set
7. Lubrica Ting System -----------------------------1set
8. Colling Water System Distributing Device -----1set
Optional Accessories
1. Hydraulic Tapping Motor
2. Mould Temperature Controller
3. Auto Loader
4. Hopper Dryer
5. Robot
|
9. Spare ---------------------------------1set
Long Nozzle ------------------------------1pc
Short Nozzle -----------------------------1pc
Hearter (Large)-------------------------- 1pc
Hearter (Small)---------------------------1pc
SSR or Magneto--------------------------1set
Safety Fuse Variety Size --------Each 5pcs
Hearter Sw--------------------------------2pcs
Sensor ------------------------------------1pc
O-Ring ------------------------------------1set
Screw Point -------------------------------1pc
Screw Bush--------------------------------2pcs
Screw Injection Core --------------------2pcs
6mm Grease Tube ------------------------1M
6mm Grease Tube Connector ---------5set
4mm Grease Tube ------------------------3M
4mm Grease Tube Connector --------10set
 |
| ¡@ |
¡@ |
|
|
|
|
|
About Steady Stream Business
Based in Taiwan, Steady Stream Business has been
manufacturing plastic injection molding machines
and plastic injection mold / moulds since 1987. With capacities from 75 tons to
3000 tons, plastic injection molding machines and molds are sold throughout the
world.
Address: No. 333, 3F-2, Su Wei 2nd Road., Ling Ya District, Kaohsiung,
Taiwan, R.O.C.
Tel: 886-7-3358029; 3358030 Fax: 886-7-3358034
y29771@ms25.hinet.net (Japanese)
ssb58029@ms8.hinet.net (English)
|
