Products
Plastic Injection Molding Machine
new model Plastic Injection Molding Machine with Microprocessor
2-Color Plastic Injection Molding Machine
CPVC injection molding machine
¡@
¡@
¡@
|
Hydrahlic clamping 2 color type |
Machine Specification of SH2-R Series
| Models | Unit | SH2-360R | SH2-430R | SH2-520R | SH2-650R | SH2-800R | SH2-1000R | ||||||||||||||||||
| Injection Unit |
A(F) | B(R) | A(F) | B(R) | A(F) | B(R) | A(F) | B(R) | A(F) | B(R) | A(F) | B(R) | |||||||||||||
| Screw Dia |
mm | 45 | 50 | 45 | 50 | 50 | 55 | 50 | 55 | 55 | 60 | 55 | 60 | 60 | 65 | 60 | 65 | 65 | 70 | 65 | 70 | 70 | 75 | 70 | 75 |
| Inj. Pressure |
kg/cm2 | 1989 | 1612 | 1989 | 1612 | 1960 | 1620 | 1960 | 1620 | 1916 | 1610 | 1916 | 1610 | 1887 | 1610 | 1887 | 1610 | 1860 | 1600 | 1860 | 1600 | 1866 | 1628 | 1866 | 1628 |
| Theoretical Shot Colume |
cm3 | 397 | 490 | 397 | 490 | 539 | 653 | 539 | 653 | 712 | 847 | 712 | 847 | 847 | 994 | 847 | 994 | 995 | 1154 | 995 | 1154 | 1346 | 1545 | 1346 | 1545 |
| (PS) Inj. Capacity |
g | 345 | 426 | 345 | 426 | 470 | 568 | 470 | 568 | 619 | 736 | 619 | 736 | 736 | 865 | 736 | 865 | 896 | 1039 | 896 | 1039 | 1171 | 1344 | 1171 | 1344 |
| oz | 12.0 | 14.9 | 12.0 | 14.9 | 31.3 | 19.8 | 31.3 | 19.8 | 21.6 | 25.7 | 21.6 | 25.7 | 25.7 | 30.2 | 25.7 | 30.2 | 31.3 | 36.3 | 31.3 | 36.3 | 40.9 | 47.0 | 40.9 | 47.0 | |
| Inj. Rate |
cm3/sec | 178 | 220 | 178 | 220 | 182 | 220 | 182 | 220 | 223 | 265 | 223 | 265 | 270 | 325 | 270 | 325 | 303 | 352 | 303 | 352 | 392 | 449 | 392 | 449 |
| Srcew Revoiving |
rpm | 170 | 170 | 153 | 153 | 152 | 152 | 200 | 200 | 152 | 152 | 170 | 170 | ||||||||||||
| Clamping Unit |
|||||||||||||||||||||||||
| Clamping Stroke |
mm | 1020 | 1080 | 1150 | 1400 | 1550 | 1800 | ||||||||||||||||||
| Space Bet. Tie Bars (HxV) |
mm | 660x660 | 710x710 | 860x760 | 980x810 | 1130x810 | 1230x930 | ||||||||||||||||||
| Mold Platen Dimensions(HxV) |
mm | 1030x1030 | 1120x1120 | 1310x1210 | 1420x1270 | 1630x1310 | 1800x1500 | ||||||||||||||||||
| Range of Mold Height |
mm | 300-680 | 320-740 | 350-800 | 400-850 | 450-1000 | 500-1000 | ||||||||||||||||||
| Daylight Open |
mm | 1320 | 1400 | 1500 | 1800 | 2000 | 2300 | ||||||||||||||||||
| Hydraulic Ejector Stroke |
mm | 200 | 200 | 200 | 230 | 275 | 300 | ||||||||||||||||||
| Electrical Unit |
|||||||||||||||||||||||||
| Pump Motor |
HP(kw) | 65(48.7) | 80(60.0) | 95(71.2) | 107.5(80.7) | 130(97.5) | 160(120) | ||||||||||||||||||
| Heater Wattage |
kw | 16.8 | 20.4 | 30 | 30 | 30 | 32.4 | ||||||||||||||||||
| Pump Pressure(Max) |
kg/cm2 | 140 | 140 | 140 | 140 | 140 | 145 | ||||||||||||||||||
| Machine Dimension |
|||||||||||||||||||||||||
| LxWxH Machine Dimensions |
m | 6.8x1.8x2.2 | 7.0x1.9x2.15 | 7.3x2.1x2.25 | 7.7x2.3x2.3 | 8.2x2.44x2.5 | 9.2x2.6x2.6 | ||||||||||||||||||
| Net Weight |
Ton | 16.5 | 19 | 22 | 29 | 40 | 58 | ||||||||||||||||||
| Packing Dimension | M | ¡@ | ¡@ | ¡@ | ¡@ | ¡@ | ¡@ | ||||||||||||||||||
| Cross Weight |
ton | ¡@ | ¡@ | ¡@ | ¡@ | ¡@ | ¡@ | ||||||||||||||||||
¡@
About Steady Stream Business
Based in Taiwan, Steady Stream Business has been manufacturing plastic injection molding machines and plastic injection mold / moulds since 1987. With capacities from 75 tons to 3000 tons, plastic injection molding machines and molds are sold throughout the world.
Address: No. 333, 3F-2, Su Wei 2nd Road., Ling Ya District, Kaohsiung, Taiwan, R.O.C.
Tel: 886-7-3358029; 3358030 Fax: 886-7-3358034
y29771@ms25.hinet.net (Japanese)
ssb58029@ms8.hinet.net (English)